Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch of the Kia Picanto?

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Clutch

It will be possible to replace the clutch installed on the Kia Picanto by lifting the car with a jack or a lift, so that the right front wheel is not in contact with the ground. Once the wheel and the corresponding inner fender have been removed, it will be necessary to proceed with the removal of the entire gearbox. To remove the gearbox, all connectors must be disconnected and the mounting screws loosened: after removal, the clutch located between the flywheel and the gearbox can be identified and removed and replaced with a new one.

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Clutch Cable on a Kia Picanto
How to Remove and Replace the Clutch Cable on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today, we will go through the main instructions on how to remove the clutch cable from a Kia Picanto. First, open the bonnet of the vehicle and locat…
How to Adjust the Clutch on a Kia Picanto
How to Adjust the Clutch on a Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) Briefly follow these instructions to adjust the clutch on the Kia Picanto. First, open the bonnet and locate the clutch cable, which is found at the …
Guide to Adjusting the Clutch on the Kia Picanto
Guide to Adjusting the Clutch on the Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) Today's guide will illustrate the main steps useful for adjusting the clutch on the Kia Picanto, following the instructions below. First, ensure that…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos