Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the windshield wipers of the Kia Stinger

Model: Kia Stinger MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

Video tutorial

Let's see how to change the windshield wipers of the Kia Stinger: first, we need to activate the maintenance mode. Press the start button twice, then turn off the ignition; immediately after, pull the windshield wiper lever towards you, as if to use the windshield washer, and hold it down for 2 seconds.

The windshield wiper arms will raise to the maintenance position. Remember that the two arms are asymmetric: one is 26 inches and the other is 18 inches.

Unlock the mechanism and slide the blade down. Install the new one and reattach it. Bring the arms back to the windshield and to deactivate maintenance mode, simply start the engine.


Posted on 23 October 2025 by ScegliAuto


Related tutorials

What is the fuse layout of the KIA Stinger?
What is the fuse layout of the KIA Stinger?
Kia Stinger (2017-2024 / MK 1) In this video we can see where the fuse boxes of the KIA Stinger are located and what their respective diagrams are, useful in case we need to check …
What is the fuse diagram for the KIA Stinger?
What is the fuse diagram for the KIA Stinger?
Kia Stinger (2017-2024 / MK 1) In this video, we can see where the fuse boxes of the KIA Stinger are located and what their corresponding diagrams are, useful in case we need to ch…
How to reset the oil light on the Kia Stinger
How to reset the oil light on the Kia Stinger
Kia Stinger (2017-2024 / MK 1) If you want to manually reset the oil light on your Kia Stinger, then all you have to do is read the following guide carefully and follow the various…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos