Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2014 Kia Cadenza

Model: Kia Cadenza VG - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

If you own a first-generation 2014 Kia Cadenza and want to manually reset the maintenance light, follow this guide and apply the described steps. Once inside the vehicle, insert the key and turn on the ignition by pressing the appropriate button twice in quick succession.

Next, press the menu button multiple times until the maintenance screen appears on the display. Finally, hold down "OK" until the reset of the light is complete, and the procedure is finished.


Posted on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on a Kia Cadenza?
How to Replace the Alternator on a Kia Cadenza?
Kia Cadenza (2010-2016 / VG) To replace the alternator on a Kia Cadenza, open the hood to access the components inside the engine bay. You will need to loosen the screws that sec…
Where Are the Fuses in a Kia Cadenza?
Kia Cadenza (2010-2016 / VG) The fuses in a Kia Cadenza are located within the designated fuse boxes installed in the vehicle: the first is inside the cabin, at the lower left pa…
How to Replace the Remote Battery in the KIA Cadenza?
How to Replace the Remote Battery in the KIA Cadenza?
Kia Cadenza (2017-2022 / YG) Replacing the remote battery in the KIA Cadenza, as shown in this tutorial, is an extremely simple and quick task. To do this, you will need a small …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos