Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Tyre Pressure on the Kia Niro

Model: Kia Niro SG2 - Years 2021-2026
Part:

Here's how to check the tyre pressure on the Kia Niro: turn on the ignition, and use the buttons on the steering wheel, pressing the button with the arrow icon on the right side of the wheel. Keep pressing until you see the TPMS screen, where you will read the pressure of all four tyres. For a manual check, use a pressure gauge, unscrew the valve cap, press the gauge onto the valve, and read the displayed value. Then, compare the measured pressure with the value indicated on the driver's door pillar, located on the door frame.

Posted on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a 2024 Kia Niro
How to Reset the TPMS Light on a 2024 Kia Niro
Kia Niro (2021-2026 / SG2) Today, you will learn how to independently reset the tyre pressure monitoring system (TPMS) light on the 2024 Kia Niro. From the onboard computer, se…
How to Reset the Tyre Pressure on the 2024 Kia Niro
How to Reset the Tyre Pressure on the 2024 Kia Niro
Kia Niro (2021-2026 / SG2) Checking the condition of the tyres on the 2024 Kia Niro, specifically the inflation pressure, is done using the button indicated in the attached tut…
Kia Niro: how to reset the service in a few steps
Kia Niro: how to reset the service in a few steps
Kia Niro (2021-2026 / SG2) On the Kia Niro, turn on the ignition and use the buttons on the left side of the steering wheel (up/down and OK) to enter the display menu. From the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos