Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : How to remove the rear light of a Kia Sportage

Kia Sportage - Video tutorial

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Tail light
Operation: How to remove the rear light of a Kia Sportage

Let's see how to remove the rear light of a Kia Sportage and how to change the damaged bulbs inside it. We open the bonnet of the luggage compartment, with a screwdriver we unscrew (with a socket wrench or screwdriver with insert) the tightening screws placed on the side of the rear light; as soon as the headlight is free from any constraint we can detach it from the body with a plastic lever (disconnect the relative power connectors). We replace damaged bulbs with pieces of the same size and voltage. Finally we go to reassemble the rear light in its sheet metal housing and test its correct functioning.


Posted on 16 November 2023 by ScegliAuto



How do you remove the rear tail light of the Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) In order to remove the rear light of the Kia Sportage, you need to open the rear hatch so that the black trim panel next to the corresponding light i
How to remove the rear light of a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) .. Let's see how to remove the rear light of a Kia Sportage and how to replace the bulbs inside it. We open the bonnet..
How to remove the rear light bulb of a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Before we begin, we will have to open the tailgate of our Kia Sportage. So let's start by unscrewing and removing the screws that secure the rear lig

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos