Do it yourself
Frequently asked questions about cars and motorcycles

Remove the Radio from a Kia Sorento

Model: Kia Sorento MK 1 - Years 2002-2009
Part: Car stereo

Do you want to remove the radio from your Kia Sorento but don't know how to proceed? Let's see how to remove the original stereo in this guide. Remove the trim around the stereo using a plastic lever (where the air vents are located) and detach it from the centre console. Once the stereo is free from constraints, use a screwdriver to unscrew the securing screws located on either side. Pull the stereo out with your hands and disconnect the connectors (for power and the antenna). To reassemble, reverse the disassembly steps.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Sorento (2009-2014 / MK 2) This guide shows how to perform a forced reset of the standard radio in a Kia Sorento, following the instructions below. First, get inside the vehicl…
Kia Sorento (2014-2020 / MK 3) To reset the UVO radio of the Kia Sorento, press and hold a small button located next to the knob on the left side of the radio. You may need a thin …
Kia Sorento (2014-2020 / MK 3) To successfully disassemble the factory radio inside the cabin of your 2014 Kia Sorento, you must follow the steps described in our new guide. First,…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos