Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bulb from the Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Headlight bulb

Is the front headlight bulb blown? How do you change the bulb? Let’s see how to remove the bulb from inside the headlight. Lift the headlight cover, locate the headlight unit, and remove the cap at the back to access the bulbs: pry on the plastics until you detach the cover. Once the cover is removed, disconnect the electrical connector, and you will find the bulbs inside. Remove the damaged bulb and replace it with a new one (always of the correct type and size). Close the back of the front headlight with the cover cap.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fog Light Bulb on a Kia Rio
How to Replace the Front Fog Light Bulb on a Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) Today, we will discover the steps to remove and replace the front fog light bulb on a Kia Rio, located on the bumper. To access the fog light bulb, i…
How to Change Headlamp Bulbs on Kia Rio
How to Change Headlamp Bulbs on Kia Rio
Kia Rio (2017-2023 / ) Are the bulbs in the headlamp of your Kia Rio blown and need changing? Here's how to do it. Open the front bonnet by pulling the lever located at the…
How to Replace the Interior Light Bulb of a Kia Rio
How to Replace the Interior Light Bulb of a Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) To replace the interior light bulb of a Kia Rio, use a screwdriver to pry off the light fitting that covers the bulb. Once the light fitting is remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos