Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Gearbox Oil on a Kia Picanto

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Transmission fluid

See other generations:
Video tutorial

In this guide, you will see the main steps to replace the gearbox oil on a first-generation Kia Picanto. First, lift your vehicle and unscrew the bolts of the protection plate of the gearbox using a socket spanner; then unscrew the other bolts securing the lower casing and remove the gasket.

At this point, remove the pin by tapping it with a punch to let all the oil drain out, as illustrated in the video; finally, pour in the new oil and follow the video to the end!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How do you replace the clutch of the Kia Picanto?
How do you replace the clutch of the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) It will be possible to replace the clutch installed on the Kia Picanto by lifting the car with a jack or a lift, so that the right front wheel is not…
Where is the Oil Filter on a 2018 Kia Picanto?
Where is the Oil Filter on a 2018 Kia Picanto?
Kia Picanto (2018-2026 / MK 3, JA) This short video clearly explains the procedure for changing the oil on your 2018 Kia Picanto and shows where the oil filter is located. As you can s…
How to Change the Oil in a Kia Picanto
How to Change the Oil in a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Changing the engine oil in a Kia Picanto is a straightforward task that can be done independently, provided you purchase the original filter and the …

    Frequently Asked Questions

    • Picanto 2018-2026 - How do I change the gearbox oil on the Kia Picanto 1.0? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos