Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil in a Kia Picanto

Model: Kia Picanto 2A, MK 1 - Years 2004-2011
Part: Engine oil

Changing the engine oil in a Kia Picanto is a straightforward task that can be done independently, provided you purchase the original filter and the manufacturer's oil. First, lift the car with a jack to remove the oil sump using a socket wrench, allowing the old oil to drain out. Once the oil has fully drained, reattach the oil sump. Lower the car and change the filter, which is located under the exhaust manifold; use a chain wrench to unscrew it. Remove and install the new filter. Finally, add the new oil, with a capacity of 3 litres.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Picanto (2004-2011 / 2A, MK 1) This video shows how to change the engine oil on a 2006 Kia Picanto. The tutorial is also valid for vehicles of the same type produced in different y…
Kia Picanto (2004-2011 / 2A, MK 1) In this guide, you will see the main steps to replace the gearbox oil on a first-generation Kia Picanto. First, lift your vehicle and unscrew the bol…
Kia Picanto (2004-2011 / 2A, MK 1) How to change the engine oil and filter on a Kia Picanto. A simple operation following the right steps, see in this video how to proceed. Lift the ca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos