Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil Filter on a Kia Picanto

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

How to change the engine oil and filter on a Kia Picanto. A simple operation following the right steps, see in this video how to proceed.

Lift the car on a column lift, unscrew the plug of the oil sump with a spanner (after removing the plastic protective panel), allow the fluid to drain into a disposal container and re-screw the sump plug (use a socket spanner to unscrew the filter located inside the engine bay). After removing the oil from the engine, lower the car and lift the bonnet, securing it. Refill the engine with the new fluid.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Kia Picanto (2018-2026 / MK 3, JA) To change the engine oil in a Kia Picanto, start the engine for a few minutes to slightly warm the lubricant and facilitate its drainage. Then turn o…
Kia Picanto (2004-2011 / MK 1, 2A) Let's look at the oil change for a Kia Picanto and the filter replacement. Lift the car with a jack, then locate the oil drain plug. Unscrew the bolt…
…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos