Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : Alternator belt replacement

Kia Sportage - Video tutorial

Model: Kia Sportage MK 1, JA - Years 1993-2002
Part: Alternator
Operation: Alternator belt replacement

The alternator is located in the front right part of the engine compartment (looking from the front), near the engine oil level stick: to access it, remove the air intake conveyor located immediately above the radiator. Once the alternator has been intercepted, it is sufficient to loosen the adjustment screws to loosen the tension of the belt and to be able to remove it. Then apply the new belt, checking its correct length and tension it with the appropriate adjustment screws: an incorrect tension would tend to make the belt slip.


Posted on 16 July 2023 by ScegliAuto



V-belt replacement
Kia Sportage (2004-2010 / MK 2, KM) The V-belt is also called the auxiliary belt since it drives the so-called auxiliary services to the engine such as the alternator, the air condition
Timing timing belt replacement
Kia Sportage (2004-2010 / MK 2, KM) Replacing the timing belt is a very delicate operation, recommended only for experts. Obtain the replacement belt, chain tensioner wheels, tensioners
Kia Soul 2.0L timing belt replacement
Kia Sportage (2010-2016 / SL, MK 3) In today's video we will see how to remove and replace the timing belt of the Kia Soul 2.0L. First of all we lift the car and start by removing the r

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos