Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : V-belt replacement

Kia Sportage - Video tutorial

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: V-belt
Operation: V-belt replacement

The V-belt is also called the auxiliary belt since it drives the so-called auxiliary services to the engine such as the alternator, the air conditioning compressor, the power steering pump. Before proceeding with disassembly, it is suggested to note the passage of the belt itself through the various pulleys in order to facilitate subsequent installation. In the case of the car in question, the auxiliary belt can be inspected by turning it on from the wheel arch compartment on the passenger side and is kept under tension through the alternator: it is therefore sufficient to loosen the adjusting screw to be able to remove it.


Posted on 16 July 2023 by ScegliAuto



Timing timing belt replacement
Kia Sportage (2004-2010 / MK 2, KM) Replacing the timing belt is a very delicate operation, recommended only for experts. Obtain the replacement belt, chain tensioner wheels, tensioners
Kia Soul 2.0L timing belt replacement
Kia Sportage (2010-2016 / SL, MK 3) In today's video we will see how to remove and replace the timing belt of the Kia Soul 2.0L. First of all we lift the car and start by removing the r
How to change the timing belt of the Kia Sportage.
Kia Sportage (2010-2016 / SL, MK 3) The replacement of the timing belt is necessary when it starts to show anomalies such as strange noises. In the following video tutorial, you will be

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos