Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Kia Sorento

Model: Kia Sorento MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: V-belt

See other generations:
Video tutorial

To replace the serpentine belt on a Kia Sorento, turn off the engine and wait for it to cool completely. Open the bonnet and locate the belt routing on the alternator, air conditioning compressor, and other accessories.

If space is limited, lift the vehicle and remove the necessary lower cover to access the area. Before disassembly, observe or photograph the routing of the old belt.

Insert a suitable spanner onto the automatic tensioner and rotate it in the necessary direction to relieve tension. While holding it in position, slide the belt off one pulley and then the others.

Install the replacement following the same routing, ensuring the grooves are correctly seated. Slowly release the tensioner, check the alignment, and start the engine to verify that the belt runs smoothly.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Kia Sorento 2.2
Guide to Replacing the Timing Belt on the Kia Sorento 2.2
Kia Sorento (2020-2026 / MK 4) Today, we will discover the steps and instructions to remove and replace the timing belt on the Kia Sorento 2.2. First, raise the vehicle and begin b…
How to Reset the Service Light on the Kia Sorento
How to Reset the Service Light on the Kia Sorento
Kia Sorento (2014-2020 / MK 3) Today, with the help of this simple and brief video tutorial, you will learn how to reset the service light on the 2019 Kia Sorento. This operation i…
How to reset the service in the KIA Sorento?
How to reset the service in the KIA Sorento?
Kia Sorento (2014-2020 / MK 3) Resetting the service on the KIA Sorento, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos