Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Replacement of the Clutch on a Kia Sportage 1.7 CRDI

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Clutch

This guide provides step-by-step instructions for disassembling and replacing the clutch on a Kia Sportage 1.7 CRDI. First, lift the vehicle and start by removing the front wheels; then remove the front driveshaft and the engine mount located on the left side of the engine bay, lifting the engine from below as shown in the video. At this point, unscrew the bolts of the gearbox, disconnecting the various electrical connectors; once the transmission is disconnected, you can proceed with the disassembly and replacement of the clutch kit, following the video tutorial to the end!

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the engine oil and oil filter of the Kia Sportage 2.0 CRDI.
Replacement of the engine oil and oil filter of the Kia Sportage 2.0 CRDI.
Kia Sportage (2016-2022 / QL, MK 4) In this guide, we will see the steps that will allow us to perform the ordinary maintenance check, replacing the engine oil and oil filter, of the Ki…
How to Remove the EGR Valve on the Kia Sportage MK2 2.0 CRDI 16V
How to Remove the EGR Valve on the Kia Sportage MK2 2.0 CRDI 16V
Kia Sportage (2004-2010 / MK 2, KM) In this video, learn how to remove and replace the EGR valve on the second generation Kia Sportage with a 2.0 CRDI 16-valve engine. First, open the b…
How to Replace the Engine Oil and Oil Filter on a Kia Sportage 2.0 CRDI
Kia Sportage (2010-2016 / SL, MK 3) Learn how to carry out the procedure and routine maintenance service by replacing the engine oil and oil filter on the Kia Sportage 2.0 CRDI. First, …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos