Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on the Kia Sportage MK2 2.0 CRDI 16V

Model: Kia Sportage MK 2, KM - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: EGR valve

See other generations:
Video tutorial

In this video, learn how to remove and replace the EGR valve on the second generation Kia Sportage with a 2.0 CRDI 16-valve engine. First, open the bonnet and remove the upper cover; then locate the EGR valve at the rear of the engine.

Next, disconnect the exhaust manifold pipe from the valve by unscrewing the securing bolts; remove the manifold pipes and unscrew the EGR valve screws to take it off, disconnecting the electrical connector from the sensor. Now proceed with cleaning the valve or directly with the replacement.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace the EGR Valve on the Kia Sportage CRDI - Hyundai Tucson
How to Replace the EGR Valve on the Kia Sportage CRDI - Hyundai Tucson
Kia Sportage (2010-2016 / MK 3, SL) Today, let's discover the steps to remove and replace the EGR valve on the Kia Sportage CRDI, as well as the Hyundai Tucson. Lift the bonnet of the v…
How to Remove the EGR Valve from a Kia Sportage
How to Remove the EGR Valve from a Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Before you begin, open the front bonnet of your Kia Sportage. Start by unclipping and moving the metal clips securing the hoses around the exhaust ma…
How to Replace the EGR Valve on a Kia Sportage?
How to Replace the EGR Valve on a Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) To replace the EGR valve on a Kia Sportage, open the bonnet to access the components in the engine bay. On the right side of the bay, locate the air …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos