Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on the Kia Sportage CRDI - Hyundai Tucson

Model: Kia Sportage MK 3, SL - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: EGR valve

See other generations:
Video tutorial

Today, let's discover the steps to remove and replace the EGR valve on the Kia Sportage CRDI, as well as the Hyundai Tucson. Lift the bonnet of the vehicle and start by disconnecting and removing the battery, disconnecting the terminals and then the bolt of the bracket found at the bottom; next, remove the intake hose connected to the air filter box, as shown in the video.

At this point, disconnect the EGR valve duct by unscrewing the securing screws and disconnecting the electrical connector to remove it and replace it with the new one (or clean it if that is sufficient to restore its function).


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve on the Kia Sportage MK2 2.0 CRDI 16V
How to Remove the EGR Valve on the Kia Sportage MK2 2.0 CRDI 16V
Kia Sportage (2004-2010 / MK 2, KM) In this video, learn how to remove and replace the EGR valve on the second generation Kia Sportage with a 2.0 CRDI 16-valve engine. First, open the b…
How to Remove the EGR Valve from a Kia Sportage
How to Remove the EGR Valve from a Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Before you begin, open the front bonnet of your Kia Sportage. Start by unclipping and moving the metal clips securing the hoses around the exhaust ma…
How to Replace the EGR Valve on a Kia Sportage?
How to Replace the EGR Valve on a Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) To replace the EGR valve on a Kia Sportage, open the bonnet to access the components in the engine bay. On the right side of the bay, locate the air …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos