Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the timing belt on the Kia Sportage 2.0L

Model: Kia Sportage JA, MK 1 - Years 1993-2002
Part: Timing belt

This guide outlines the main steps to remove and replace the timing belt on the Kia Sportage 2.0L diesel. First, open the bonnet of your car and begin disconnecting and removing the serpentine belt; then remove the radiator fan by disconnecting the electrical connector, as shown in the video. At this point, remove the timing cover and take the necessary references to remove and replace the timing belt; simply apply the reverse procedure for reassembly!

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Timing Belt on a Kia Sportage
How to Change the Timing Belt on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Replacing the timing belt is necessary when it starts to show signs of wear, such as unusual noises. In the following video tutorial, you will see ho…
Guide to Replacing the Timing Belt on the Kia Sportage 2.0L
Guide to Replacing the Timing Belt on the Kia Sportage 2.0L
Kia Sportage (1993-2002 / JA, MK 1) Let’s look at the main steps to remove and replace the timing belt on the Kia Sportage 2.0L. First, open the bonnet and start disconnecting the radia…
How and when to replace the timing belt of the Kia Sportage 2.7 V6
How and when to replace the timing belt of the Kia Sportage 2.7 V6
Kia Sportage (2004-2010 / MK 2, KM) Today's main steps will show us the necessary instructions on how to disassemble and replace the timing belt of the Kia Sportage 2.7 V6; the manufact…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos