Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Kia
  4. :
  5. Soul
  6. : Replacing the faulty battery

Kia Soul - Video tutorial

Model: Kia Soul MK 1 - Years 2008-2014
Part: Battery
Operation: Replacing the faulty battery

If there are problems in starting the car, the fault could lie in the battery which no longer supplies the necessary current, so it must be replaced. The average life of a battery is approximately three years. The battery is located in the engine hood. As a first operation, loosen the nut of the negative terminal clamp and remove it away from the battery, then loosen the nut of the positive terminal and extract it from the battery pole away from it. Unscrew the nut located on the right side of the battery by removing the sealing plate on the bottom of the battery. Remove the battery from its housing using the special handles. Install the new battery and secure it properly with the screw and its plate. Clean the battery terminals with sandpaper or a rag. Place the clamp on the positive pole pushing it all the way down and tighten the sealing nut, then carry out the same operation with the negative clamp. Do not dispose of the exhausted battery in the environment but take it to the appropriate collection centers.


Posted on 17 July 2023 by ScegliAuto



How to replace the battery of the Kia Soul
Kia Soul (2008-2014 / MK 1) Replacing the battery is an operation that can absolutely be performed do-it-yourself without any counter-indication other than to take care to note
Which is the radiator fan fuse in the KIA Soul?
Kia Soul (2013-2018 / MK 2) If the radiator fan of our KIA Soul has suddenly stopped working, the first thing we can do is check the status of the respective fuse, whose locatio
Remove battery on Kia Soul
Kia Soul (2008-2014 / MK 1) Remove the battery on Kia Soul? Let's see the replacement of the damaged battery. We open the car door and pull up the engine compartment opening lev

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos