Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : Instructions for replacing the glow plugs on the Kia Cee'd 1.4 CRDI

Kia Cee D - Video tutorial

Model: Kia Cee D MK 1 - Years 2006-2012
Part: Glow plugs
Operation: Instructions for replacing the glow plugs on the Kia Cee'd 1.4 CRDI

In this short guide we will see the steps that will allow us to disassemble and replace the pre-heating glow plugs on the Kia Cee'D, with 1.4 CRDI engine. First of all we open the bonnet of our car and we go to identify the glow plugs, which we find on the rear part of the engine block; then we go to remove the pipettes or the upper cables and use a socket wrench with extension to unscrew and remove the glow plugs. At this point let's replace them with new ones, of the right type; we just have to screw them first by hand and then tighten them again with a key!


Posted on 2 March 2024 by ScegliAuto



Removing the Kia Cee'd spark plugs
Kia Cee D (2006-2012 / MK 1) In this short video we will see the position of the spark plugs of a Kia Cee'd, so that they can be removed. First of all, we open the bonnet of the
How to replace the spark plugs on the Kia Cee D
Kia Cee D (2006-2012 / MK 1) As a first operation, unhook the hood from the special lever to then be able to lift and hold it with the appropriate rod, then remove the upper rear
How to replace the front headlight of the Kia Cee'd.
Kia Cee D (2012-2018 / JD, MK 2) The process of disassembling and replacing the front headlight and its bulbs of the Kia Cee’d is really simple and only takes a few minutes. First, w

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos