Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Your Car Speakers

Model: Kia Sorento MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Speaker

See other generations:
Video tutorial

The following guide shows how to replace your car speaker in a few steps. Once you locate the position of the speakers, use a screwdriver to remove all the screws holding the grille in place and take it off. Next, unscrew the screws securing the speaker and disconnect the wires, then unplug the jack to remove the old speakers.

After this operation, install the new speakers by reversing the procedure: reconnect the jack, reposition the speaker to the car body, and do the same with the grille.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Kia Sorento
How to replace the headlight bulb of the Kia Sorento
Kia Sorento (2009-2014 / MK 2) If you want to replace the headlight bulb of your second generation Kia Picanto by yourself, all you have to do is follow the steps described in our …
How to Change the Interior Light Bulb in a Kia Sorento
How to Change the Interior Light Bulb in a Kia Sorento
Kia Sorento (2009-2014 / MK 2) Let's see how to change the damaged bulb in the interior light of a Kia Sorento. Use a screwdriver to pry between the transparent plastic of the ligh…
Oil Change Reset on a Kia Sorento
Oil Change Reset on a Kia Sorento
Kia Sorento (2020-2026 / MK 4) Through today's video, you will see the entire operation needed to reset the engine oil change light on a Kia Sorento, latest generation model produc…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos