Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for the Kia Seltos

Model: Kia Seltos MK 1 - Years 2019-2026
Part: Engine oil

Let's go through the step-by-step instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Kia Seltos CRDI. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, open the hood and use a socket wrench to unscrew the oil filter, replacing the cartridge and gasket with the new ones, as shown in the video. Finally, unscrew the fill cap and pour in the new oil of the correct type!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Kia Seltos
How to Change the Engine Oil and Oil Filter on the Kia Seltos
Kia Seltos (2019-2026 / MK 1) Follow these steps to change the engine oil and oil filter as part of the routine maintenance for the Kia Seltos. First, lift the vehicle and remove …
How to Reset the Engine Oil Light on the Kia Seltos
How to Reset the Engine Oil Light on the Kia Seltos
Kia Seltos (2019-2026 / MK 1) Follow these instructions to reset the engine oil service light on the Kia Seltos in simple and quick steps. First, get in the vehicle and turn on th…
How to Reset the Oil Light in a 2021 Kia Seltos
How to Reset the Oil Light in a 2021 Kia Seltos
Kia Seltos (2019-2026 / MK 1) To manually reset the oil change warning light in your 2021 Kia Seltos, you don’t need any diagnostic tools. Just follow these steps. First, insert t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos