Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Forte K3
    4. : How do you replace the spark plugs on the Kia Forte K3?

Kia Forte K3 - Video tutorial

Model: Kia Forte K3 MK  2, YD - Years 2013-2018
Part: Spark plugs
Operation: How do you replace the spark plugs on the Kia Forte K3?

In order to replace the spark plugs of the Kia Forte K3 you have to open the hood, so that you can go and remove the plastic cover from the upper part of the engine block. In this way, it will be possible to access the components placed under it: here the connectors connected to the injectors will be identified and must be disconnected. In this way you can unscrew the bolts that secure the injectors, so that they are extracted giving access to the spark plugs below. These will now have to be removed from their seat using the appropriate socket wrench, so that they can then be replaced with new spare parts.


Posted on 24 June 2022 by ScegliAuto



Where is the fuse box of the Kia Forte 2023 located?
Kia Forte K3 (2018-2024 / MK  3, BD) To successfully find the fuse box inside your 2023 Kia Forte third generation, simply follow the instructions described in our new mini guide. First,
To reset the oil light on the 2015 Kia Forte.
Kia Forte K3 (2013-2018 / MK  2, YD) The procedure required to successfully complete the manual reset of the oil light on your 2015 Kia Forte is really simple and takes a few seconds to
How to replace the air filter in the KIA Forte K3?
Kia Forte K3 (2013-2018 / MK  2, YD) As we can see in this tutorial, replacing the air filter in the KIA Forte K3 is an extremely simple and fast operation. First of all, we wait for the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos