Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : Sheet straightening without painting

Kia Sportage - Video tutorial

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Bodywork
Operation: Sheet straightening without painting

Very often it is possible to straighten some dents without having to resort to traditional plastering and painting: there are in fact on the market special equipment capable of pulling out the dents without damaging the bodywork; these are suction cup extractors that are fixed to the center of the dent with specific hot glue and then pulled through a captive pin; removing the glue leaves no residue and some imperfections must then be corrected using a plastic punch. It is clear that this type of repair must be carried out by qualified personnel. However, if the dent has already damaged the paint, a traditional repair will have to be done.


Posted on 5 August 2023 by ScegliAuto



Remove the Kia Sportage instrument cluster
Kia Sportage (2004-2010 / MK 2, KM) Remove the instrument cluster of the Kia Sportage? Let's remove the protective frame of the painting first, let's see. Using a screwdriver, unscrew t
How do you reset the Kia Sportage Service light?
Kia Sportage (2016-2022 / QL, MK 4) In order to reset the Kia Sportage Service warning light, you need to turn on the instrument panel and press the button with the sheet icon located o
How to remove the rear light of a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Let's see how to remove the rear light of a Kia Sportage and how to replace the bulbs inside it. We open the bonnet of the luggage compartment, with

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos