Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air filter

See other generations:
Video tutorial

This video tutorial quickly explains how to replace the old air filter located in the engine bay of a Kia Picanto. After opening the bonnet, locate the filter box. Unclip the three clips and lift the box from the top. There is no need to completely remove the cover: it is sufficient to lift it enough to extract the filter.

Now remove the old dirty filter. Take a completely new one and position it in the same way as the one just removed.

As a final step, you will need to close the three clips as before.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on a Kia Picanto
How to Replace the Engine Air Filter on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Keeping the engine air filter clean and efficient is crucial for the engine to draw the correct airflow and ensure good performance and fuel efficien…
Air Filter Replacement on Kia Picanto 1.2
Air Filter Replacement on Kia Picanto 1.2
Kia Picanto (2018-2026 / MK 3, JA) Lift the bonnet and place the support rod. Looking to your right, you will see the air filter box, obviously connected to the intake duct, but you wi…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Kia Picanto (2004-2011 / MK 1, 2A) The cabin air filter is located on the passenger side, just behind the glove compartment. To replace the filter, you must first remove the glove comp…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos