Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : Rear light bulb replacement

Kia Picanto - Video tutorial

Model: Kia Picanto MK 1, 2A - Years 2004-2011
Part: Light bulb
Operation: Rear light bulb replacement

To replace the rear light bulb it is necessary to remove the light itself: therefore open the rear hood and unscrew the fixing screws of the light which are located along the inner edge of the closing line of the hood, remove the light from its seat and unhook the lamp holder by turning it about 90 degrees counterclockwise; then extract the bulb (bayonet coupling) and insert the new one: it is advisable to check its operation before repositioning the headlight in its seat. Once the check has been made, proceed backwards to assemble the headlight, inserting it in its seat and tightening the relative fixing screws.


Posted on 14 August 2023 by ScegliAuto



How to replace the front position light bulb on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Before starting, we will have to open the front hood of our Kia Picanto. So let's start by unscrewing and removing the bolts that secure the headligh
How to replace the headlight bulb on the Kia Picanto?
Kia Picanto (2004-2011 / MK 1, 2A) In order to replace the headlight bulb of the Kia Picanto, you need to open the hood to access the engine compartment and remove the circular plastic
How to replace the daytime running light bulb on the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) In order to replace the Kia Picanto daytime running light bulb you have to unscrew the screws that secure the inner cover of the wheel arch correspon

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos