Do it yourself
Frequently asked questions about cars and motorcycles

How to Top Up the Coolant on a Kia Niro

Model: Kia Niro MK 1 - Years 2016-2023
Part: Antifreeze coolant

This very short video tutorial shows how to top up the coolant on a first-generation Kia Niro. The coolant reservoir is located in the engine bay, so first, open the bonnet. Once done, find the tank on your left, unscrew the cap, and start adding the missing coolant using a funnel. Ensure the level is between the MIN and MAX marks indicated on the reservoir. Finally, screw the cap back on. It is recommended to perform this operation when the engine is cold.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Niro (2016-2023 / MK 1) .. In this video, you will see how to top up the coolant on a Kia Niro: the reservoir is located in the engine compartment between the.. …
Kia Niro (2016-2023 / MK 1) The main instructions today will show you how to remove and replace the 12V battery of the Kia Niro. First, locate the battery positioned in the boot…
Kia Niro (2016-2023 / MK 1) If you want to manually reset the service indicator on the display of the instrument panel of your 2021 Kia Niro in total autonomy, all you have to d…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos