Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Niro
    4. : How to top up the coolant on the Kia Niro

Kia Niro - Video tutorial

Model: Kia Niro MK 1 - Years 2016-2023
Part: Antifreeze liquid
Operation: How to top up the coolant on the Kia Niro

In this video, we see how to top up the coolant in the Kia Niro: the reservoir is located in the engine compartment between the engine block and the fuse box. We will need a funnel for easy topping up, and remember that the cap unscrews counterclockwise. The liquid needed for topping up is the "EV Battery System Antifreeze" from Kia, but a good red antifreeze like Bardahal Antifreeze OA can also work well, which we can purchase at a more affordable price on Amazon with the code B07JC66FF3 for $11.90 per liter bottle, with free delivery. Let's make sure the liquid is between "Min" and "Max" and screw the cap back on. Let's do this job when the engine is cold.


Posted on 11 August 2023 by ScegliAuto



How to top up coolant on a Kia Niro
Kia Niro (2016-2023 / MK 1) We can see thanks to this very short video tutorial how to top up the coolant on a first generation Kia Niro. So the coolant tank is located inside t
How to replace the battery in the remote control of the Kia Niro?
Kia Niro (2016-2023 / MK 1) In order to replace the battery of the Kia Niro remote control, you must hold down the side button of the remote control and remove the key from the
How to replace the headlight bulb on the Kia Niro?
Kia Niro (2016-2023 / MK 1) To be able to replace the headlight bulb of the Kia Niro you need to open the hood, so that you can have access to the internal part of the correspon

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos