Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on the Kia Quoris K9 K900

Model: Kia Quoris K9 K900 MK 2, RJ - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

If you need to replace the remote key battery for this vehicle, you can find simple instructions in this description and refer to the images in the tutorial video. On the short side of the remote, there is a slot that you can pull out towards you; inside the slot is the compartment containing the battery.

Remove the old battery and insert the new one (model CR 2412). Be careful with the battery orientation and position the positive terminal facing up. Insert the slot back into the remote key housing, and the job is done.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Kia K900?
How to Replace the Key Fob Battery of the Kia K900?
Kia Quoris K9 K900 (2018-2025 / MK 2, RJ) To replace the battery of the Kia K900 key fob, press the button on the side of the device so that the emergency key can be extracted from its lower …
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) Today, let's look at a known issue regarding the Kia Quoris K900. This is a problem with the alternator that can occur during the vehicle's use. If y…
Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) In this vehicle model, all fuses are located within 3 boxes. The first is in the cabin on the left side near the driver's door and is protected by a …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos