Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change for the Kia Pegas Soluto

Model: Kia Pegas Soluto MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

Video tutorial

Let's briefly go over the main steps to perform routine maintenance by changing the engine oil and oil filter for the Kia Pegas Soluto. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, using the appropriate wrench, unscrew the oil filter (located next to the oil pan), replacing the cartridge with the new one. At this point, unscrew the fill cap and top off by pouring in the suitable oil for your engine!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Light in the Kia Pegas Soluto
How to Reset the Tire Pressure Light in the Kia Pegas Soluto
Kia Pegas Soluto (2017-2024 / MK 1) In the video, we can see the exact procedure to reset the tire pressure light in the Kia Pegas Soluto. In this vehicle, unlike most others, there is …
How to Know the Fuse Diagrams of a Kia Pegas Soluto and Their Locations
How to Know the Fuse Diagrams of a Kia Pegas Soluto and Their Locations
Kia Pegas Soluto (2017-2024 / MK 1) The video shows us the diagrams related to the assignment of the fuses present in a Kia Pegas Soluto and the respective positions of the fuse boxes. …
How to Replace the Position Light Bulb in the Kia Pegas Soluto?
How to Replace the Position Light Bulb in the Kia Pegas Soluto?
Kia Pegas Soluto (2017-2024 / MK 1) The position light bulb in the Kia Pegas Soluto is easily accessible without needing to disassemble any part of the vehicle. To replace it, whether w…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos