Do it yourself
| ||||
|
Kia Picanto - Video tutorial
Model: Kia Picanto
MK 1, 2A
- Years 2004-2011 In this video, we see how to clean the MAP sensor of a Kia Picanto: first, we identify the intake manifold, where we will remove the electrical connector, then using a 10mm wrench, we remove the two bolts that secure the sensor and it comes off very easily. We can see that it is indeed very dirty and has various residues: we clean it with a can of compressed air, to carefully remove all the residues without touching it with our hands, as we could damage it. Once cleaned, we can put it back in place and tighten the two bolts again. Then we reconnect the electrical connector and the job is done.
Posted on 14 July 2023 by ScegliAuto
Where is the OBD2 port located in the Kia Picanto 2?
Kia Picanto (2011-2018 / TA, MK 2) If you are curious to know where the OBD2 port is located on your second-generation Kia Picanto (year 2011-2018), then you just need to pay attention
How to replace the thermostat on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replacing the thermostat on a Kia Picanto requires some specific steps. Here is a general guide that may help you. Open the hood of your Kia Picanto
How to reset the TPMS light of the 2015 Kia Picanto.
Kia Picanto (2011-2018 / TA, MK 2) If the orange tire pressure monitoring system (TPMS) light on the instrument panel of your second-generation Kia Picanto (2015 model year) illuminate Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |