Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight Assembly of the Kia Optima

Model: Kia Optima / K5 MK 3, TF - Years 2010-2015
Part: Headlight

Below are the main instructions on how to remove and replace the front headlight assembly of the Kia Optima. First, open the bonnet of your car and begin removing all the plastic clips found on the panel above the front bumper; then, unscrew the headlight fixing screws using a 10 mm socket wrench, as shown in the video. At this point, gently unclip the bumper at the sides to access the lower screw of the headlight; disconnect the electrical connector of the bulbs to remove and replace the front headlight!

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Kia Optima
How to replace the front headlight bulb of the Kia Optima
Kia Optima / K5 (2015-2020 / JF, MK 4) Today we will explain how to replace the headlight bulb on the Kia Optima. To perform this operation, we must first open the hood, then disconnect th…
How to disassemble the headlight washer nozzle of the Kia Optima.
How to disassemble the headlight washer nozzle of the Kia Optima.
Kia Optima / K5 (2010-2015 / MK 3, TF) Let's see in this brief guide the instructions that will allow us to disassemble and replace the headlight washer nozzle of the Kia Optima, in simple…
How to replace the rear headlight bulb of the Kia Optima
How to replace the rear headlight bulb of the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) In the following guide, we will explain the various steps you need to take in order to properly replace the rear headlight bulb of your Kia Optima. F…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos