Do it yourself
| ||||
|
Kia Carnival - Video tutorial
Model: Kia Carnival
MK 2, VQ
- Years 2006-2014 The guide below shows you how to best replace your car's brake discs. The braking system is of utmost importance to ensure that the vehicle always maintains optimum efficiency. The replacement procedure can be carried out independently without resorting to the help of the mechanic, all you need is a good deal of manual skills. First you will need to jack up the car and remove the rim after removing the wheel bolts, then take a hex wrench and unscrew all the bolts that hold the caliper firmly to the frame on the rear side. Once this is done, only the caliper bracket will remain with the brake pads inside. The latter must be removed using a suitable flat screwdriver, paying particular attention not to damage the disc. Then the bolts that hold the bracket firmly to the hub must be unscrewed. At this point, only the brake disc will remain and will need to be replaced.
Posted on 5 September 2023 by ScegliAuto
Replacement discs and front pads
Kia Carnival (2006-2014 / MK 2, VQ) To replace the front discs and pads, lift the car on the bridge and remove the front wheel; then unscrew the fixing pins of the caliper to its suppor
How to perform a service reset on Kia Carnival
Kia Carnival (2006-2014 / MK 2, VQ) In this video tutorial we can see how to reset the engine oil light on Kia Carnival. The first thing to do is car maintenance such as changing the en
Disassembly of the Kia Carnival radio
Kia Carnival (2006-2014 / MK 2, VQ) In this video tutorial we will see how to disassemble the original car stereo of a Kia Carnival second series. First we get inside the car and try to Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |