Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Kia Stonic?

Model: Kia Stonic Ybcuv, MK 1 - Years 2017-2026
Part: Service warning light

To reset the Service light on the Kia Stonic, you need to turn on the instrument panel by turning the ignition key inside the corresponding block: once the instrument panel is on, you can press and hold the RESET button located on the right side of the steering wheel. When the Service light on the instrument panel starts flashing, release the button and then press it again. Continue to hold the button until the light is reset and then you can turn off the instrument panel.

Posted on 2 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2022 Kia Stonic
How to Reset the Service Light on the 2022 Kia Stonic
Kia Stonic (2017-2026 / Ybcuv, MK 1) If you intend to manually reset the service light on your Kia Stonic (2022 model), carefully follow the procedure below to do it correctly. First, en…
How to reset the Service light on a Kia Stonic?
How to reset the Service light on a Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) To reset the Service light on a Kia Stonic, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, press and hol…
How do you reset the Service light on the Kia Stonic?
How do you reset the Service light on the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) You can completely eliminate the Service light that appears on the instrument panel of the Kia Stonic by turning on the instrument panel by turning t…

Other guides you may be interested in

    Frequently Asked Questions

    • Kia Stonic 2017-2026 - What does the oil warning light on the Kia Stonic mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos