Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on the Kia Sorento

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

Today's step-by-step instructions will show you how to remove and replace the diesel filter on the Kia Sorento, following these simple steps. First, open the bonnet of the vehicle and begin by removing the battery, disconnecting both terminals (positive and negative) and unscrewing the bracket screw; then disconnect the two fuel inlet and outlet pipes from the filter, unscrewing the bracket screw to remove and replace the diesel filter with a new one, as shown in the video.

Finally, reconnect everything, replacing the fuel pipes if damaged or worn.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on Kia Sorento 2.5 d
How to Replace the Fuel Filter on Kia Sorento 2.5 d
Kia Sorento (2002-2009 / MK 1) Replacing the fuel filter on a Kia Sorento 2.5 d, let's see how to remove it. Lift the front bonnet, locate the fuel filter as shown in the video. Us…
How to Replace the Diesel Filter on the Kia Sorento 2.5 CRDi
How to Replace the Diesel Filter on the Kia Sorento 2.5 CRDi
Kia Sorento (2002-2009 / MK 1) Today, follow these instructions to remove and replace the diesel filter on the Kia Sorento 2.5 CRDi in simple steps. First, open the bonnet of the v…
How to Remove and Clean the EGR Valve of the Kia Sorento 2.2 CRDI
How to Remove and Clean the EGR Valve of the Kia Sorento 2.2 CRDI
Kia Sorento (2009-2014 / MK 2) This guide shows the steps to remove and clean the EGR valve of the Kia Sorento 2.2 CRDI. First, open the bonnet of the vehicle and start disconnecti…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos