Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on Kia Sorento 2.5 d

Model: Kia Sorento MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

See other generations:
Video tutorial

Replacing the fuel filter on a Kia Sorento 2.5 d, let's see how to remove it. Lift the front bonnet, locate the fuel filter as shown in the video. Using a screwdriver/pliers, disconnect the wires and various hoses from the filter (where the fuel filter is located).

Unscrew the fastening screws of the metal cover. Once the cover of the filter is removed, take it out of the vehicle (replace it with a new filter).

Install the filter into the attached fuel filter housing, reconnect the hoses and wires, and tighten the appropriate bolts of the cover. After connecting all the hoses, you can close the bonnet.

Start the vehicle and check if it works.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on the Kia Sorento
Replacing the Diesel Filter on the Kia Sorento
Kia Sorento (2009-2014 / MK 2) Today's step-by-step instructions will show you how to remove and replace the diesel filter on the Kia Sorento, following these simple steps. First, …
How to Replace the Fuel Pump on a Kia Sorento
How to Replace the Fuel Pump on a Kia Sorento
Kia Sorento (2002-2009 / MK 1) In today's tutorial video, you will learn how to remove and replace the fuel pump on a first-generation Kia Sorento by following these simple steps. …
How to Open the Fuel Door if it is Stuck on the KIA Sorento?
How to Open the Fuel Door if it is Stuck on the KIA Sorento?
Kia Sorento (2020-2026 / MK 4) On the KIA Sorento, the fuel door may get stuck, for example, due to a problem with the control button or the lock actuator. In these cases, you can …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos