Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Kia Sorento

Model: Kia Sorento MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel pump

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the fuel pump on a first-generation Kia Sorento by following these simple steps. First, access the rear and recline the seat to reach the pump; then, open the fabric cover and remove the fuel pump cover.

At this point, disconnect the various fuel hoses and also disconnect the fuel level sensor; now, simply pull out the old pump as shown in the video and replace it with the new one, following the video to the end!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Pump on a Kia Sorento
How to Replace the Windscreen Washer Pump on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows how to replace the washer pump on a Kia Sorento. First, ensure the windscreen wipers are functioning and that there is water in the …
How to Replace the Diesel Filter on the Kia Sorento 2.5 CRDi
How to Replace the Diesel Filter on the Kia Sorento 2.5 CRDi
Kia Sorento (2002-2009 / MK 1) Today, follow these instructions to remove and replace the diesel filter on the Kia Sorento 2.5 CRDi in simple steps. First, open the bonnet of the v…
Replacing the Diesel Filter on the Kia Sorento
Replacing the Diesel Filter on the Kia Sorento
Kia Sorento (2009-2014 / MK 2) Today's step-by-step instructions will show you how to remove and replace the diesel filter on the Kia Sorento, following these simple steps. First, …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos