Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for the Kia Sorento

Model: Kia Sorento MK 2 - Years 2009-2014
Part: Battery

Today we will see the instructions that will allow us to disassemble and replace the battery of the Kia Sorento. First, we open the vehicle's hood and start removing the engine air intake, removing the plastic clips; then we disconnect both battery terminals (positive and negative), unscrewing the screw of the bracket we find at the bottom to remove it from its compartment, as shown in the video. At this point we install the new battery, of the correct type and with the same amperage, inserting it in the correct direction; all that's left is to check the engine ignition!

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery of the 2016 Kia Sorento.
How to replace the key battery of the 2016 Kia Sorento.
Kia Sorento (2014-2020 / MK 3) To change the battery inside the key of your 2016 Kia Sorento, simply follow the steps outlined in this guide. First, purchase a new battery, making …
Replacing the Battery of the Kia Sorento
Replacing the Battery of the Kia Sorento
Kia Sorento (2014-2020 / MK 3) We will briefly see the instructions to remove and replace the battery of the Kia Sorento in simple and quick steps. First, open the bonnet and begin…
How to Replace the Alternator on a Kia Sorento
How to Replace the Alternator on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide covers the removal of the alternator on a Kia Sorento. Pull the lever located at the bottom left of the dashboard and lift the bonnet, sec…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos