Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Sx 250
Part: Bearing

This guide will show you how to dismantle and replace the front wheel bearing on the KTM SX 250 enduro bike in simple steps. First, place the bike on a stand and start by unscrewing the central axle of the wheel to remove it from the forks; then use a small screwdriver to remove the bearing seal, subsequently dismantling the bearing as shown in the video. At this point, install the new bearing correctly until it is fully seated; then lightly grease it before fitting the new dust seal!

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Sx 250 In this guide, we will see the procedure to remove and replace the crankshaft oil seal and the sprocket on the KTM SX 250 enduro bike. First, remove …
Sx 250 These brief and simple instructions will guide you on how to disassemble and replace the air filter of the KTM SX 250 engine. First, place the bike o…
Sx 250 This brief and simple video shows how to remove and replace the engine air filter on the KTM SX-F 250 enduro bike, as well as on the 125 and 50 model…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos