Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service on the KTM Superduke 1290 R?

Model: Ktm Superduke 1290 R
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the service on the KTM Superduke 1290 R, a very simple and quick operation to perform only after completing the scheduled maintenance work. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine.

Next, navigate to the settings menu using the directional buttons located on the left side of the handlebars. Press and hold the up arrow and down arrow buttons to enter the maintenance menu, adjust the interval as needed, and save the setting by holding down the right arrow.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Superduke 1290 R You can clear the Service light displayed on the instrument panel of the KTM Superduke 1290 R by turning on the ignition, inserting the key into the …
Superduke 1290 R To replace the battery on a KTM Superduke 1290 R, loosen the screws that secure the seat to its housing: once it is removed, you can locate the devic…
Superduke 1290 R In this tutorial, you will see how to replace the battery in the KTM Superduke 1290 R, a very simple and quick operation. First, ensure that the key …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil on a Triumph Scrambler 1200?

Changing the engine oil on a Triumph Scrambler 1200, as shown in this tutorial, is an extremely simple and quick task. First, wait until the engine is sufficiently cool, then place a container underneath the bike. Locate the drain hole bolt and loosen it using an 8 mm hex key. Allow all the oil in the system to drain out, then remove the old filter with a 17 mm socket. Tighten both the new filter and the bolt. At this point, simply pour in the new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos