|
Do it yourself
| |||
| ||||
|
Model: Kymco People 250
In these short and simple steps, we will see how to install the front wheel of the Kymco People 250 scooter. First, we put the scooter on the center stand and start to remove the front wheel if it has not already been removed; this way, you can choose to replace the tire or the brake disc. At this point, we install the wheel and secure the central pin, tightening it with a socket wrench; we reassemble the brake caliper on the disc, fixing it correctly, making sure that the brake pads are in good condition (if not, replace them).
Posted on 23 June 2025 by ScegliAuto
Video tutorial
Related tutorials
People 250
Before you begin, ensure that the service has been completed. Start by sitting on the seat of your Kymco People 250. Next, insert and turn the key in…
People 250
Before you can begin, sit on the seat of your Kymco People 250. Start by inserting the key into the ignition switch and turning it fully clockwise. O…
People 250
You can replace the drive belt on the Kymco People 250 by loosening the screws that secure the transmission cover, located on the left side near the …
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
