|
Do it yourself
| |||
| ||||
Kymco People 250 - Video guides
Kymco People 250 How to Replace the Belt on the Kymco People 250 You can replace the drive belt on the Kymco People 250 by loosening the screws that secure the transmission cover, located on the left side near the rear …Read all… Posted on 24 May 2026 by ScegliAuto
Kymco People 250 How to replace the light control unit of the Kymco People 250 S. In this guide, we will see the instructions that will allow us to disassemble and replace the light control unit of the Kymco People 250 S scooter. First, …Read all… Posted on 27 December 2025 by ScegliAuto
Kymco People 250 How to reassemble the front wheel of the Kymco People 250 In these short and simple steps, we will see how to install the front wheel of the Kymco People 250 scooter. First, we put the scooter on the center stand and …Read all… Posted on 23 June 2025 by ScegliAuto
Kymco People 250 How to Remove the Top Box from a Kymco People/Agility In this video, you will see how to remove the top box from a Kymco People or Agility (the procedure is the same). As seen in the video, at the central rear …Read all… Posted on 9 August 2026 by ScegliAuto
Kymco People 250 How to Change the Spark Plug on a Kymco People S 250 Today, we will see in this short tutorial how to remove and replace the spark plug on the Kymco People S 250 scooter in simple steps. First, place the scooter …Read all… Posted on 6 August 2026 by ScegliAuto
Kymco People 250 How to Start a Kymco People 250 Before you can begin, sit on the seat of your Kymco People 250. Start by inserting the key into the ignition switch and turning it fully clockwise. Once done, …Read all… Posted on 10 July 2026 by ScegliAuto
Kymco People 250 How to Reset the Maintenance Light on a Kymco People 250 Before you begin, ensure that the service has been completed. Start by sitting on the seat of your Kymco People 250. Next, insert and turn the key in the …Read all… Posted on 8 July 2026 by ScegliAuto
Kymco People 250 Battery Replacement on Kymco People 250 Using the ignition key, lift the seat to access the compartment underneath. At the back of the under-seat compartment, you will find the battery compartment. …Read all… Posted on 22 May 2026 by ScegliAuto |
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |