Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on the Kymco People 250

Model: Kymco People 250
Part:

Video tutorial

You can replace the drive belt on the Kymco People 250 by loosening the screws that secure the transmission cover, located on the left side near the rear wheel. Once the cover is removed, loosen the screws that secure the clutch and the variator, freeing the belt from its housing.

At this point, you can fit the new belt and the other components you removed. Finally, seal everything by fitting the cover back on to ensure everything functions correctly.


Posted on 24 May 2026 by ScegliAuto


Related tutorials

People 250 Before you begin, ensure that the service has been completed. Start by sitting on the seat of your Kymco People 250. Next, insert and turn the key in…
People 250 Before you can begin, sit on the seat of your Kymco People 250. Start by inserting the key into the ignition switch and turning it fully clockwise. O…
People 250 In this guide, we will see the instructions that will allow us to disassemble and replace the light control unit of the Kymco People 250 S scooter. F…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos