Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Kymco People 250

Model: Kymco People 250
Part: Battery

Video tutorial

Using the ignition key, lift the seat to access the compartment underneath. At the back of the under-seat compartment, you will find the battery compartment.

Remove the cover of this compartment and unscrew, disconnecting, the two battery terminals. It's that simple! Remember to always disconnect the negative terminal first, then proceed to the positive.

Once done, manually remove the battery from its housing and insert the new one. Reconnect the terminals in reverse order and refit the cover. Job done.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Kymco People 250
How to Reset the Maintenance Light on a Kymco People 250
People 250 Before you begin, ensure that the service has been completed. Start by sitting on the seat of your Kymco People 250. Next, insert and turn the key in…
How to Start a Kymco People 250
How to Start a Kymco People 250
People 250 Before you can begin, sit on the seat of your Kymco People 250. Start by inserting the key into the ignition switch and turning it fully clockwise. O…
How to replace the light control unit of the Kymco People 250 S.
How to replace the light control unit of the Kymco People 250 S.
People 250 In this guide, we will see the instructions that will allow us to disassemble and replace the light control unit of the Kymco People 250 S scooter. F…

How to Replace the Exhaust on a TM Racing 300?

To replace the exhaust on a TM Racing 300, you will need to loosen the screws securing the panel located on the right side of the rear mudguard: once the screws are loosened, you can proceed to detach the panel and locate the screws for the exhaust supports. By loosening these as well, you can widen the clamp connecting the exhaust to the exhaust manifold: the new exhaust can now be positioned, connecting it with the corresponding ring and securing it to the supports with the screws just removed.

Watch the video!


by ScegliAuto

More videos