Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery on a Kymco Agility 125

Model: Kymco Agility 125
Part: Battery

Video tutorial

In this video tutorial, you will learn how to remove and replace the battery of a Kymco Agility 125 scooter in simple steps. First, remove the plastic cover of the footwell by unscrewing all the fixing screws; then access the battery compartment located at the bottom.

At this point, unscrew the terminal screws (positive and negative) and extract the old battery, replacing it with the new one of the correct type. Finally, insert it into the battery compartment, connect the two terminals, and reassemble everything by following the reverse procedure of disassembly!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Agility 125 To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you w…
Agility 125 In this guide for your Kymco Agility 125, discover how to manually set the time using the buttons on the central display. First, position your Agilit…
Agility 125 To replace the battery on a Kymco Agility 125, open the under-seat compartment by turning the key in the lock located on the left side of the bike. O…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos