Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Agility 125
Part: Battery

To replace the battery on a Kymco Agility 125, open the under-seat compartment by turning the key in the lock located on the left side of the bike. Once the seat is lifted, loosen the bolts securing the cover at the top of the under-seat compartment and remove it. This will give you access to the battery, which must be disconnected from its terminals and freed from the crossbar securing it. Once the battery is free, replace it with a new spare part and close it with the appropriate cover.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Kymco Agility 125?
How to Replace the Battery of the Kymco Agility 125?
Agility 125 To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you w…
Replacing the Battery on a Kymco Agility 125
Replacing the Battery on a Kymco Agility 125
Agility 125 In this video tutorial, you will learn how to remove and replace the battery of a Kymco Agility 125 scooter in simple steps. First, remove the plasti…
How to Remove the Spark Plug from a Kymco Agility 125
How to Remove the Spark Plug from a Kymco Agility 125
Agility 125 Before you start, position your Kymco Agility 125 on the centre stand. Begin by removing the floor panel fairing by unscrewing the fixing screws. Nex…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos