Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rollers and Variator on a Kymco Downtown 125

Model: Kymco Downtown 125
Part:

Video tutorial

In today's video tutorial, you will see how to disassemble and replace the variator and rollers on the Kymco Downtown 125 scooter. First, place your scooter on the centre stand and begin unscrewing all the screws securing the side cover of the transmission; then unscrew the central nut of the fan and that of the clutch bell, removing them along with the belt, as shown in the video.

At this point, remove the variator and replace the rollers found inside; if necessary, replace the entire variator, applying the reverse procedure for reassembly!


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Kymco Downtown 125?
How to Replace the Clutch on a Kymco Downtown 125?
Downtown 125 To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. O…
How to Top Up the Coolant on a Kymco Downtown 125?
How to Top Up the Coolant on a Kymco Downtown 125?
Downtown 125 To top up the coolant on a Kymco Downtown 125, loosen the screws immediately above the handlebars to remove the front fairing of the scooter. Once re…
How to Change the Engine Oil and Gear Oil of the Kymco Downtown 125
How to Change the Engine Oil and Gear Oil of the Kymco Downtown 125
Downtown 125 Below are the instructions needed to perform the routine maintenance service, replacing the engine oil, oil filter, and gear oil of the Kymco Downtow…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos