Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Coolant on a Kymco Downtown 125?

Model: Kymco Downtown 125
Part: Antifreeze coolant

Video tutorial

To top up the coolant on a Kymco Downtown 125, loosen the screws immediately above the handlebars to remove the front fairing of the scooter. Once removed, loosen the screws that secure the windscreen, which will also need to be removed to access the components underneath.

Here, you will find the coolant reservoir cap: by removing the cap, you can add coolant until the reservoir is full, then reassemble all the removed parts.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Gear Oil of the Kymco Downtown 125
How to Change the Engine Oil and Gear Oil of the Kymco Downtown 125
Downtown 125 Below are the instructions needed to perform the routine maintenance service, replacing the engine oil, oil filter, and gear oil of the Kymco Downtow…
How to replace the engine oil and oil filter of the Kymco Downtown 125
How to replace the engine oil and oil filter of the Kymco Downtown 125
Downtown 125 This guide will briefly illustrate how to perform the routine maintenance service by replacing the engine oil and oil filter of the Kymco Downtown 12…
How do you adjust the time on the Kymco Downtown 125?
How do you adjust the time on the Kymco Downtown 125?
Downtown 125 Simply put, if we notice that the clock on our Kymco Downtown 125 is not updated, we can solve it in this way: turn on the instrument panel, locate t…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos