Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Upholster the Glove Compartment of a Lada Granta with Fabric

Model: Lada Granta MK 1 - Years 2011-2024
Part: Glove compartment

This job is a DIY project that is great for very cold climates; it was done on a Lada Granta, which is a Russian car, but there's nothing stopping you from doing it on any vehicle, even your own, if you like the idea. You can get self-adhesive fabric, which is much easier than the gluing work done by our YouTuber, who complained about the cost of self-adhesive fabric on his YouTube page, while we can buy it in all colors and textures on any e-commerce platform at very competitive prices. As you can see, the only difficulty is making a template to cut out the various pieces. Applying them will be very easy, and the result will be guaranteed.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Lada Granta?
What is the Fuse Diagram for the Lada Granta?
Lada Granta (2011-2024 / MK 1) The video explains in detail the various fuses present in the Lada Granta. In addition to the location of the fuse box, the various images show the e…
How to Replace the Front Brake Pads on a Lada Granta?
How to Replace the Front Brake Pads on a Lada Granta?
Lada Granta (2011-2024 / MK 1) To replace the front brake pads on a Lada Granta, lift the vehicle so that the wheel corresponding to the pads to be replaced is not in contact with …
How to Repair a Rusty Handle on a Lada Granta
How to Repair a Rusty Handle on a Lada Granta
Lada Granta (2011-2024 / MK 1) We will see how to repair a rusty handle on a Lada Granta. Our YouTuber had a big problem with a nasty rust bubble on the handle. Although he clearly…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos