Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to remove the front brake disc of a Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon MK 2, 843, Ypsilon 2, Y2 - Years 2003-2011
Part: Brake discs
Operation: How to remove the front brake disc of a Lancia Ypsilon

How to remove the front brake disc of a Lancia Ypsilon. We place our car on a column or jack bridge, we lift to a comfortable height to intervene. Unscrew the pins with a telescopic wrench or compressed air drill and remove the rim, then we begin to unscrew the brake caliper pins by detaching it from the support. With a screwdriver we detach the brake pads. Now remove the caliper support and unscrew the pins on the disc brake (torx insert screwdriver), pull the disc towards us with our hands in order to remove it from the wheel hub. We mount the brake disc with all the pins attached. Finally we assemble the circle with the pins.


Posted on 13 October 2023 by ScegliAuto



Replacing the front brake disc pads on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) How to remove and replace the front brake disc pads on a Lancia Ypsilon. We place our car on a column bridge, we lift to a comfortable height to inte
How to replace discs and pads on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) How to replace brake discs with relative pads on a Ypsilon? Let's see the disassembly of the parts in the Lancia car. We lift the car with a column b
How to replace the front brake pads on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Let's see how to replace the front brake pads on a Lancia Ypsilon. We raise the car on a column point (jack) to the desired height, immediately after

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos