Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Climate Control Lights on a Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Instrument panel light

See other generations:
Video tutorial

To replace the climate control lights on your Lancia Ypsilon, start by removing the radio: to do this, insert the four specific pins into the holes at the corners to counteract the springs of the housing. Once fully inserted, pull out the radio and disconnect the DIN connector and the antenna.

At this point, you can see the three bulb holders (left, right, and centre) for the climate controls, which you can pull out by gently tugging with a small pair of tweezers. At this point, simply pull out the small bulb and reassemble everything in reverse order.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Where to Find the Fuses on the Lancia Ypsilon?
Where to Find the Fuses on the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) The fuses on the Lancia Ypsilon are located inside the dedicated fuse boxes installed in the vehicle: in this type of vehicle, you will be able to id…
How to Replace the Radio in a Lancia Ypsilon?
How to Replace the Radio in a Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) To replace the radio in a Lancia Ypsilon, extract the radio from its housing by simply pulling it out and disconnecting the connectors attached to it…
Removing the Radio from a Lancia Y
Removing the Radio from a Lancia Y
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In this video tutorial, you will learn how to remove the radio from a Lancia Ypsilon of its second generation. First, get inside the car: removing th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos